|
|
Family house with an establishment
Kadlecová, Kateřina ; Drobeček, David (referee) ; Daněk, Lukáš (advisor)
This project addresses a cascade two-storey detached house with a residential unit on the 1st floor, which is designed for 4-5 people, and massage parlor on the 2nd floor. The house is to be bulit on the undeveloped outskirts of the village Větřní on a sloping land with a slant of approximately 25%. The building, including the massage parlor on the 2nd floor, is accessible from a local road. The main entrance is located on the 1st floor on the northern side of the house. It is accessible from a staircase which is protected against adverse weather conditions by a wooden pergola. Vertical structures are designed from the Porotherm system. As far as the roof structure is concerned, it combines extensive green roofing with damp proof foil roof insulation.
|
|
|
Kindergarten and primary school in Škrdlovice
Peňáz, Zdeněk ; Vystrčil, Jan (referee) ; Šuhajda, Karel (advisor)
The aim of this master project is to design a nzeb kindergarten and primary school in Škrdlovice. The building has three parts: kindergarten and primary school with 2 above–ground floors and basements are connected with a single canteen. The canteen has a flat extensive green roof, while the kindergarten and primary school have saddle roof. The kindergarten has two identical floors with playrooms, locker rooms, bed and toy storage, teacher’s office, and bathrooms. First floor of the primary school contains locker room, teacher’s’ offices, it classroom, afterschool centre, and toilets. Three classrooms, headmaster’s office, and toilets are in the second floor. The building is designed using Xella building system. The external load–bearing walls, slabs, and internal non–bearing walls are made of aerated concrete blocks. The internal load–bearing are made of lime–sand blocks. The building is insulated with non–fibrous mineral panels. The project includes design of lightning, HVAC, DHW, and photovoltaics systems. The project also includes a study of three structural details including 3D models in BIM software and their thermal assessment. The project was designed using BIM software Revit.
|
|
|
The Optimization of Structural Details for Flat Single-leaf Roofs
Matějka, Libor ; Bura,, Roman (referee) ; Pěnčík, Jan (referee) ; Doc.Ing. Karel Kubečka, Ph.D (referee) ; Matějka, Libor (advisor)
This thesis deals with the optimization of structural details for flat single-leaf roofs. In the first part of the thesis, 3 groups of structural details for flat roof (flat roof parapet, gutter at flat roof without overhang of the roof cladding, intersection of the flat roof and vertical supporting structure) are characterized, classified and examined. In every group one of these structural details is designed with use of modern composite material based on secondary raw materials (still in development process). The theory describes the current issue of thermal bridges at constructions and applicable legislative documents. The next part introduces thermal engineering analysis (based on finite element method) of structures with annotated data outputs. The another main part of thesis provides with designed innovative optimization algorithm using multi-criteria decision analysis methods, which is then practically tested on the surveyed construction details. The conclusion summarizes the results and provides with improvements based on completed research.
|
|
|
Bus station
Kadlecová, Kateřina ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
Master’s thesis addresses the design and implementation documentation of the three storey bus station in the Czech Krumlov Street Hospital . From this street is also suggested links to the transport infrastructure of the entire plot of land at 497/1 . Object Bus Station is located on the western part of the site . The main entrance is oriented to the southeast side of the building. The main hall on the first floor is primarily used for passengers. There is a waiting room , treasury , information and Internet room. Further, the circuit layout is 7 retail space with a pharmacy for dispensing drugs. The left wing spaces are public toilets and sanitary facilities for employees. There is also a buffet with 30 seats . The second floor space small cafe with a terrace where you can view the historical part of the city . Furthermore, the time of day or a rest room for drivers and office spaces with sanitary facilities . On the third floor are offices spaces again and archives there is also a ventilation machine room and a sprinkler system.
|
|
|
Kindergarten "U Mlékárny"
Pielesz, Dariusz ; Vystrčil, Jan (referee) ; Šuhajda, Karel (advisor)
The subject of the master’s thesis is to design a kindergarten, namely the preparation of design documentation for the building permission, then the design of the building services and the thermal assessment of selected structural details. The kindergarten is located on a flat brownfield of a former dairy near the centre of Český Těšín. The building's surrounding area consists of apartment houses, a sports hall and a gardening colony. The kindergarten is designed for a total of 36 children in two classes. There are also dedicated spaces for physical activities, workshops, and an activity classroom. The building has 2 air handling units providing mechanical ventilation. Some of the rooms are cooled by air-conditioned. The heat source is heating water from the hot water district heating system, which is transferred by a pressure-independent heat exchanger unit. Sun breaker are installed on the south façade, other windows have external blinds. The building uses rainwater for flushing. The eastern part is two-storey with a flat roof with photovoltaic power plant, the western part is one-storey with a flat extensive green roof. The structural system is designed as a masonry wall system made of aerated concrete blocks, the floor structure is made of pre-stressed concrete panels. The staircase is made of aerated concrete. There is also a lift. The building is designed as wheelchair accessible. The thesis included 2D and 3D designs of three structural details. Subsequently, they were thermally assessed for thermal bridge (linear thermal transmittance and temperature coefficient) using Deksoft software.
|
|
|
Kindergarten and primary school in Škrdlovice
Peňáz, Zdeněk ; Vystrčil, Jan (referee) ; Šuhajda, Karel (advisor)
The aim of this master project is to design a nzeb kindergarten and primary school in Škrdlovice. The building has three parts: kindergarten and primary school with 2 above–ground floors and basements are connected with a single canteen. The canteen has a flat extensive green roof, while the kindergarten and primary school have saddle roof. The kindergarten has two identical floors with playrooms, locker rooms, bed and toy storage, teacher’s office, and bathrooms. First floor of the primary school contains locker room, teacher’s’ offices, it classroom, afterschool centre, and toilets. Three classrooms, headmaster’s office, and toilets are in the second floor. The building is designed using Xella building system. The external load–bearing walls, slabs, and internal non–bearing walls are made of aerated concrete blocks. The internal load–bearing are made of lime–sand blocks. The building is insulated with non–fibrous mineral panels. The project includes design of lightning, HVAC, DHW, and photovoltaics systems. The project also includes a study of three structural details including 3D models in BIM software and their thermal assessment. The project was designed using BIM software Revit.
|
|
|
The Optimization of Structural Details for Flat Single-leaf Roofs
Matějka, Libor ; Bura,, Roman (referee) ; Pěnčík, Jan (referee) ; Doc.Ing. Karel Kubečka, Ph.D (referee) ; Matějka, Libor (advisor)
This thesis deals with the optimization of structural details for flat single-leaf roofs. In the first part of the thesis, 3 groups of structural details for flat roof (flat roof parapet, gutter at flat roof without overhang of the roof cladding, intersection of the flat roof and vertical supporting structure) are characterized, classified and examined. In every group one of these structural details is designed with use of modern composite material based on secondary raw materials (still in development process). The theory describes the current issue of thermal bridges at constructions and applicable legislative documents. The next part introduces thermal engineering analysis (based on finite element method) of structures with annotated data outputs. The another main part of thesis provides with designed innovative optimization algorithm using multi-criteria decision analysis methods, which is then practically tested on the surveyed construction details. The conclusion summarizes the results and provides with improvements based on completed research.
|
|
|
Bus station
Kadlecová, Kateřina ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
Master’s thesis addresses the design and implementation documentation of the three storey bus station in the Czech Krumlov Street Hospital . From this street is also suggested links to the transport infrastructure of the entire plot of land at 497/1 . Object Bus Station is located on the western part of the site . The main entrance is oriented to the southeast side of the building. The main hall on the first floor is primarily used for passengers. There is a waiting room , treasury , information and Internet room. Further, the circuit layout is 7 retail space with a pharmacy for dispensing drugs. The left wing spaces are public toilets and sanitary facilities for employees. There is also a buffet with 30 seats . The second floor space small cafe with a terrace where you can view the historical part of the city . Furthermore, the time of day or a rest room for drivers and office spaces with sanitary facilities . On the third floor are offices spaces again and archives there is also a ventilation machine room and a sprinkler system.
|
|
|
Family house with an establishment
Kadlecová, Kateřina ; Drobeček, David (referee) ; Daněk, Lukáš (advisor)
This project addresses a cascade two-storey detached house with a residential unit on the 1st floor, which is designed for 4-5 people, and massage parlor on the 2nd floor. The house is to be bulit on the undeveloped outskirts of the village Větřní on a sloping land with a slant of approximately 25%. The building, including the massage parlor on the 2nd floor, is accessible from a local road. The main entrance is located on the 1st floor on the northern side of the house. It is accessible from a staircase which is protected against adverse weather conditions by a wooden pergola. Vertical structures are designed from the Porotherm system. As far as the roof structure is concerned, it combines extensive green roofing with damp proof foil roof insulation.
|
guest ::
